Concentration of oxide manganese ores from vicinity of Winkelman, Pinal county, Ariz by Karl C. Dean, H. D. Snedden, W. W. Agey - 1952 - 21 pages
Concentration of the potash ores of Carlsbad, New Mexico, by ore dressing methods by Will H. Coghill - 1935 - 13 pages
Concentration of Utah fluorite ores by H. D. Snedden, J. Vance Batty, W. J. Long, Dean K. C. - 1947 - 27 pages
Concentration tests on tailings from the washing plants on the Mesabi Range, Minnesota by F. D. DeVaney, W. H. Coghill, United States. Bureau of Mines - 1930 - 21 pages
Condensed suggestions for steel workers by Crucible Steel Company of America - 1902 - 32 pages
Conference on Electrical Methods of Machining, Forming, and Coating, 18-20 November, 1975 by Institution of Electrical Engineers. Science, Education, and Management Division - 1975 - 290 pages
Consistent iron by Metals Society, London. Activity Group Committee V (Ironmaking and Steelmaking), Metals Society. Activity Group Committee III (Engineering) - 1975 - 113 pages
Consolidation and fabrication techniques for vanadium-20 w/o titanium (TV-20) by W. R. Burt (Jr.), W. C. Kramer, R. D. McGowan, F. J. Karasek, R. M. Mayfield, Argonne National Laboratory. Metallurgy Division, U.S. Atomic Energy Commission - 1965 - 84 pages
Consolidation of an iron-base superalloy by powder metallurgy techniques by J. F. McIlwain, L. A. Neumeier, United States. Bureau of Mines - 1981 - 22 pages
Constitution of binary alloys by Max Hansen - 1958 - 1305 pages
Constitution of binary alloys by Max Hansen, Francis A. Shunk, Rodney P. Elliott, IIT Research Institute
Constitution of indium alloy systems by Ettore Alex Peretti - 1956 - 93 pages
Constitution of the uranium-rich U-Nb and U-Nb-Zr systems by A. E. Dwight, M. H. Mueller, Argonne National Laboratory - 1957 - 74 pages
Contact properties of rare-earth silicides and germanides on Si and Ge by Chan Shin Wu - 1985 - 510 pages
Contamination of refractory metals by oxygen, water vapor, and carbon monoxide by M. D. Ketchum, C. A. Barrett, General Electric Company, Lewis Research Center - 1970 - 120 pages
Continued study of advanced-temperature nickel-base alloys to investigate vanadium additives by John C. Freche - 1960 - 36 pages
Continuous Casting - 1997 - 496 pages
Continuous Casting by A. McLean - 1995 - 324 pages
Continuous Casting by L. J. Heaslip, J. K. Brimacombe, I. V. Samarasedera, J. E. Lait - 1984 - 238 pages
Continuous Casting by J. K. Brimacombe, I. V. Samarasekera, J. E. Lait - 1984 - 238 pages
Continuous casting by Metallurgical Society of AIME. Iron and Steel Division. Process Technology Committee - 1973 - 372 pages
Continuous casting by Metallurgical Society of AIME. Iron and Steel Division. Physical Chemistry of Steelmaking Committee, Metallurgical Society of AIME. Iron and Steel Division. Mechanical Working Committee - 1965 - 255 pages
Continuous casting by Metallurgical Society of AIME. Iron and Steel Division. Physical Chemistry of Steelmaking Committee, Metallurgical Society of AIME. Iron and Steel Division. Mechanical Working Committee - 1962 - 255 pages
Continuous casting by Metallurgical Society of AIME. Iron and Steel Division. Physical Chemistry of Steelmaking Committee, Metallurgical Society of AIME. Iron and Steel Division. Mechanical Working Committee - 1962 - 255 pages
Continuous casting '85 by Institute of Metals. Ironmaking and Steelmaking Committee - 1985 - 600 pages
Continuous casting of ferrous and non-ferrous metals by University of Birmingham - 1966 - 143 pages
Continuous casting of non-ferrous metals and alloys by Minerals, Metals and Materials Society. Non-ferrous Metals Committee - 1989 - 297 pages
Continuous casting of small cross sections by Y. V. Murty, Francois R. Mollard, Metallurgical Society of AIME. Solidification Committee - 1981 - 203 pages
Continuous casting of steel by Iron and Steel Society of AIME. Process Technology Division - 1981 - 317 pages
Continuous casting of steel by Metals Society, Institut de recherches de la sidérurgie française - 1977 - 324 pages
Continuous casting of steel by Metals Society, Institut de recherches de la sidérurgie française - 1977 - 324 pages
Continuous casting of steel by M. S. Boĭchenko - 1961 - 218 pages
Continuous casting of steel, 1970 by Charles Moore, Richard L. Deily, Lawrence Kuhn - 1970 - 341 pages
Continuous Casting. 4. Design and operations by T. B. Harabuchi, R. D. Pehlke - 1988 - 312 pages
Continuous Casting. 4. Design and operations by T. B. Harabuchi, R. D. Pehlke - 1988 - 312 pages
Continuous Casting. 8. Transverse cracking in continuously cast products by N. A. McPherson - 1997 - 272 pages
Continuous Casting: Chemical and physical interactions during transfer operations by L. J. Heaslip - 1983 - 9 pages
Continuous Casting: Chemical and physical interactions during transfer operations by L. J. Heaslip - 1983 - 9 pages
Continuous Casting: The application of electromagnetic stirring (EMS) in the continuous casting of steel by L. J. Heaslip - 1984 - 129 pages
Continuous Casting: The application of electromagnetic stirring (EMS) in the continuous casting of steel by L. J. Heaslip - 1984 - 129 pages
Continuous flotation of beryl from spodumene mill tailing, Foote Mineral Company, Kings Mountain by James S. Browning, Thomas L. McVay, Paul E. Bennett - 1964 - 24 pages
Continuous flotation testing to recover a bulk sulfide concentrate from Missouri lead ore tailings by William L. Cornell, D. C. Holtgrefe, United States. Bureau of Mines - 1989 - 7 pages
Continuous heavy liquid concentration of high-clay potash ores by K. J. Liles, J. W. Brown, G. V. Sullivan, United States. Bureau of Mines, University of Alabama - 1973 - 14 pages
Continuous processing and process control by Metallurgical Society of AIME. - 1968 - 549 pages
Contribution of casting geometry to casting defects by David Francis Bowers - 1966 - 122 pages
Contributions to the art of smelting lead products by Virgil Miller, R. Bainbridge, R. Ellison - 1940 - 12 pages
Contributions to the data on theoretical metallurgy by United States. Bureau of Mines - 1961
Contributions to the data on theoretical metallurgy by United States. Bureau of Mines - 1960
Contributions to the data on theoretical metallurgy by United States. Bureau of Mines - 1941
Contributions to the data on theoretical metallurgy by United States. Bureau of Mines - 1937
Contributions to the data on theoretical metallurgy by Kenneth Keith Kelley, United States. Bureau of Mines - 1936 - 55 pages
Contributions to the data on theoretical metallurgy by Kenneth Keith Kelley - 1936 - 166 pages
Contributions to the data on theoretical metallurgy by United States. Bureau of Mines - 1936
Contributions to the data on theoretical metallurgy by United States. Bureau of Mines - 1935
Contributions to the data on theoretical metallurgy by United States. Bureau of Mines - 1935
Contributions to the data on theoretical metallurgy by Kenneth Keith Kelley - 1934 - 78 pages
Control '84 by John Arthur Herbst, Society of Mining Engineers of AIME., Metallurgical Society of AIME. - 1984 - 441 pages
Control '90--mineral and metallurgical processing by Raj K. Rajamani - 1990 - 301 pages
Control and analysis in iron and steelmaking by R. V. Williams - 1983 - 288 pages
Control in electroplating by Institute of Metal Finishing - 1959 - 92 pages
Control of composition in steelmaking by Iron and Steel Institute - 1967 - 234 pages
Control of ductile iron through microexamination by American Foundrymen's Society. Ductile Iron Division. Quality Control Committee - 1965 - 12 pages
Control of steel construction to avoid brittle failure by Welding Research Council (U.S.). Plasticity Committee - 1957 - 184 pages
Control of steel construction to avoid brittle failure by Welding Research Council (U.S.). Plasticity Committee - 1957 - 184 pages
Conversion of ilmenite to rutile by a carbonyl process by Aarne Visnapuu, B. C. Marek, J. W. Jensen, United States. Bureau of Mines - 1973 - 20 pages
Conversion to metal of dimolybdenum carbide electrosynthesized from molybdenite by Harold J. Heinen, C. L. Barber, Don Hobart Baker, United States. Bureau of Mines - 1965 - 14 pages
Copper alloy wire products by Copper Development Association - 1965 - 93 pages
Copper and its alloys in ancient India by Dilip K. Chakrabarti, Nayanjot Lahiri - 1996 - 228 pages
Copper as a mould material by Henry J. Miller - 1936 - 15 pages
Copper as an alloying element in steel and cast iron by Clarence Herman Lorig, Robert R. Adams - 1948 - 213 pages
Copper corrosion under expected conditions in a deep geologic repository by F. King - 2001 - 176 pages
Copper exchange capacity of clays and their potential effect on in situ copper leaching by Jay S. Gomer - 1992 - 10 pages
Copper in cast steel and iron by Copper Development Association - 1955 - 132 pages
Copper in cast steel and iron by Copper Development Association, London - 1946 - 132 pages
Copper recovery from conglomerate-type native copper ore by ammonia leaching, solvent extraction, and electrowinning by Rees D. Groves, United States. Bureau of Mines - 1979 - 17 pages
Copper removal from molten ferrous scrap by Harry V. Makar, Raymond E. Brown, United States. Bureau of Mines - 1974 - 11 pages
Copper-base alloys foundry practice by American Foundrymen's Society. Brass and Bronze Division. Recommended Practices Committee - 1965 - 201 pages
Copper-manganese-base silverless brazing systems by Vernon R. Miller, Wilbert L. Falke, United States. Bureau of Mines - 1983 - 16 pages
Cores and coremaking by Francis D. Roper - 1958 - 125 pages
COREX symposium 1990 by South African Institute of Mining and Metallurgy, Iscor Limited, VÖEST-Alpine (Firm) - 1990 - 104 pages
Correlation between internal friction, electrical resistivity, and temper brittleness in steel by Abdul-Fattah Kaddouri Kaddou - 1958 - 190 pages
Correlation of ideal and actual shear strengths of metals with their friction properties by Kazuhisa Miyoshi, Donald H. Buckley, Lewis Research Center, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch - 1981 - 9 pages
Correlation of ideal and actual shear strengths of metals with their friction properties by Kazuhisa Miyoshi, Donald H. Buckley, Lewis Research Center, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch - 1981 - 9 pages
Correlation of the magnetic and mechanical properties of steel by Charles William Burrows - 1917 - 38 pages
Correlation of the Tyler and Copps formations of the Gogebic iron district, Michigan and Wisconsin by Gordon I. Atwater - 1935 - 132 pages
Corrosion autopsy of a structurally unsound bridge deck by Richard F. Stratfull, V. Van Matre, California. Division of Highways - 1973 - 17 pages
Corrosion in the Petrochemical Industry - 1994 - 501 pages
Corrosion of friction rock stabilizer steels in underground coal mine waters by A. Fletcher Jolly, L. A. Neumeier, United States. Bureau of Mines - 1987 - 14 pages
Corrosion protection of steel structures by Kenneth A. Chandler, Derek A. Bayliss - 1985 - 411 pages
Corrosion protection of steel structures by Kenneth A. Chandler, Derek A. Bayliss - 1985 - 411 pages
Corrosion resistance of metals and alloys to sodium and lithium by E. E. Hoffman, W. D. Manly, Oak Ridge National Laboratory Metallurgy Division, U.S. Atomic Energy Commission - 1957 - 11 pages
Corrosion study of bare and coated stainless steel by J. D. Morrison, John F. Kennedy Space Center - 1972 - 45 pages
Cost-affordable titanium by Minerals, Metals and Materials Society. Titanium Committee, United States. Office of Naval Research, Minerals, Metals and Materials Society. Meeting - 2004 - 220 pages
Cost-effectiveness of hot-dip galvanizing for exposed steel by Seymour K. Coburn - 1984 - 28 pages
Crack initiation and propagation in ductile irons by Joseph Olaitan Titilayo Adewara - 1975 - 480 pages
Crack initiation and propagation in ductile irons by Joseph Olaitan Titilayo Adewara - 1975 - 480 pages
Crack propagation tests of high-strength sheet steels using small specimens by J E Srawley, C.D. Beachem, Naval Research Laboratory (U.S.) - 1958
Creep and fracture of metals at high temperatures by National Physical Laboratory - 1956 - 419 pages
Creep and residual mechanical properties of cast superalloys and oxide dispersion stengthened alloys by John Daniel Whittenberger, United States. National Aeronautics and Space Administration. Scientific and Technical Information Branch - 1981 - 66 pages
Creep behavior of electron-beam-melted rhenium by Walter R. Witzke, Peter L. Raffo - 1971 - 23 pages
Creep in five steels at different temperatures by Herbert James French, H. C. Cross, A. A. Peterson - 1928 - 1 pages
Creep properties of zircaloy-2 for design application by P. J. Pankaskie, Hanford Laboratories, Hanford Atomic Products Operation, U.S. Atomic Energy Commission - 1962 - 27 pages
Critical ranges in pure iron-carbon alloys, the A3 and Acm ranges, and the merging point of A3 and A2 by William Platt Wood - 1930 - 24 pages
Critical surveys of data sources: mechanical properties of metals by R. B. Gavert, Robert Lowell Moore, Jack Hall Westbrook - 1974 - 81 pages
Crucible cast steel - 1947 - 25 pages
Crucible handbook by M. A. Schwartz, G. D. White, C. E. Curtis - 1953 - 28 pages
Crushing and grinding by Great Britain. Dept. of Scientific and Industrial Research - 1960 - 425 pages
Crushing and grinding by Great Britain. Dept. of Scientific and Industrial Research - 1960 - 425 pages
Crushing and grinding by Great Britain. Dept. of Scientific and Industrial Research - 1958 - 425 pages
Crushing and grinding by John Gross - 1938 - 148 pages
Crystal structure of hard steel by Kalman Heindlhofer - 1924 - 438 pages
Crystal structures of transition metal silicides by Carol H. Dauben, University of California, Berkeley. Radiation Laboratory - 1956 - 8 pages
Crystalline Silica - 1998 - 46 pages
Cupola handbook by American Foundrymen's Society - 1975 - 690 pages
Cupric halide hydrometallurgy by George William McDonald - 1984 - 642 pages
Current issues in the steel industry by Stephen Cooney - 2003 - 136 pages
Current solutions to hydrogen problems in steels by C. G. Interrante, American Society for Metals, United States. National Bureau of Standards, Creusot-Loire (Firm) - 1982 - 480 pages
Custom Forging Capability Chart - 1993 - 56 pages
Custom Forging Capability Guide, 1996-1997 by DIANE Publishing Company - 1996 - 58 pages
Cutting tools by R. Edwards, Ronald Edwards - 1993 - 200 pages
Cyanidation and concentration of gold and silver ores by John Van Nostrand Dorr, Francis Lawrence Bosqui - 1950 - 511 pages
Cyanidation and concentration of gold and silver ores by John Van Nostrand Dorr, Francis Lawrence Bosqui - 1950 - 511 pages
Cyanidation and concentration of gold and silver ores by John Van Nostrand Dorr, Francis Lawrence Bosqui - 1950 - 511 pages
Cyanidation and concentration of gold and silver ores by John Van Nostrand Dorr - 1936 - 485 pages
Cyanidation of gold-silver ore from Manhattan, Nev by Abraham L. Engel - 1951 - 6 pages
Cyanide practice by Alfred James - 1902 - 222 pages
Cyclic creep buckling of integrally stiffened aluminum alloy panels by C. W. King, B. J. Nolan - 1958 - 110 pages
1 2